Oceanic OCEABH1500W Guide D'utilisation page 31

For 9 and 11 fins:
1. Turn the heater on a stable surface without scratches to avoid damaging the paint or the
floor (see Fig. 1).
2. Mount the wheels on the heat sink by placing the U-bolts between the outermost fins on
each side of the radiator (see Fig.2 - 3 & Fig.5).
3. Secure the wheels on the heat sink by screwing the wing nuts on the bolts (see Fig. 4 & 6).
WARNING : Use the heater only in upright position with the bottom wheel assemblies
(bottom wheels up controls), any other position could create a dangerous situation.
31