Installation; Unpacking And Disposal Of Packaging Elements - Oceanic OCEABH1500W Guide D'utilisation

1. Unpacking and disposal of packaging elements:

Your product must be unpacked and handled with care to avoid any risk of deformation or
shock.
Make sure all the plastic parts do not remain in contact with the product.
➢ Packaging Materials
- The packaging cardboard is recyclable.
- The materials marked with the symbol
> PE <= polyethylene; > PS <= polystyrene; > PP <= polypropylene; ...
This means they can be recycled by disposing of them in appropriate collection containers.
- The other packing materials (adhesives, fasteners ...) must be disposed of with household
waste.
2. Mounting feet
3. For 7 fins:
1. Return the heater to a stable surface covered with a thick cloth to prevent damage to
the radiator or the floor covering (see Fig. 1).
2. Mount the wheels on the heat sink by placing the U-bolts between the outermost fins on
each side of the radiator (see Fig.2 - 3).
3. Secure the wheels on the heat sink by screwing the wing nuts on the bolts (see Fig. 4).
4. Attach the front wheels at the bottom of the front panel with two screws (see Fig. 5).
III. INSTALLATION
are recyclable:
30