Intended Use - Ayce KS20 Traduction De La Notice Originale

18v tronconneuse sans fil
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

• Maintain a firm grip, with thumbs and fingers encircling the chain saw handles, with both
hands on the saw and position your body and arm to allow you to resist kickback forces.
Kickback forces can be controlled by the operator, if proper precautions are taken. Do not
let go of the chain saw.
• Do not overreach and do not cut above shoulder height. This helps prevent unintended tip
contact and enables better control of the chain saw in unexpected situations.
• Only use replacement bars and chains specified by the manufacturer. Incorrect
replacement bars and chains may cause chain breakage and/or kickback.
• Follow the manufacturer's sharpening and maintenance instructions for the saw chain.
Decreasing the depth gauge height can lead to increased kickback.
Further safety instructions
• The first-time user should, as a minimum practice, cutting logs on a saw-horse or
cradle.
• Wear gloves, helmet and protective clothing if necessary.
SAFETY INSTRUCTIONS FOR CHARGER AND BATTERY
a) This appliance is not intended for use by persons (including children) with reduced
physical, sensory or mental capabilities, or lack of experience and knowledge, unless
they have been given supervision or instruction concerning use of the appliance by a
person responsible for their safety.
b) Children should be supervised to ensure that they do not play with the appliance.
c) Disconnect the charger from the mains before maintaining or cleaning the charger.
d) Do not store the tool and battery at temperature of 50°C or more.
e) Do not open the battery pack even it is damaged or worn out. The battery cartridge may
explode.
WARNING! Do not charge non-rechargeable batteries! For charging only use
batteries and chargers provided with the tool. Do not charge any other batteries
types which are not intended to be used with this charger.
WARNING! Follow the additional safety instructions of the charger if any.
If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or
similarly qualified persons in order to avoid a hazard.

INTENDED USE

This chainsaw has been designed for cutting of thin logs and pruning by holding the chain
saw with your right hand on the rear handle and your left hand on the front handle.
We are not reliable for any damages or injuries caused by wrong use or misuse. The tool is
for private use only!
80 I 81
GB

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

Yt4321

Table des Matières