Important Safety; Intended Use - Ayce SF7J139D-2 Notice Originale

use of the appliance by a person responsible for their
safety. Children should be supervised to ensure that they
do not play with the appliance.
• Children and juveniles, with the exception of apprentices
older than 16 years and under supervision, may not
operate the chain saw. The same applies for persons who
do not sufficiently know how to handle the chain saw. The
operating instructions should always be ready to hand.
Persons unfit or tired must not operate the chain saw.
• When working with the machine, always hold it firmly with
both hands and provide for a secure stance. The power tool
is guided more secure with both hands.
• Always ensure all handles and guards are fitted when
using the machine. Never attempt to use an incomplete
machine or one fitted with an unauthorized modification.
• Always wait until the machine has come to a complete stop
before placing it down. The tool insert can jam and lead to
loss of control over the power tool.
• In the interest of personal safety, it is highly recommended:
when using the chain saw always use it with a residual
current device (RCD) with a tripping current of 30 mA or
less.
• Position the cord so that it will not be caught on branches
and the like, during cutting.
Attention for usage of electric chain saw
• Before any cutting, you must wait for the saw chain
running to reach a stable speed.
• When cutting wood, please do not press the chain saw with
big force.
• During cutting, if the saw chain is stuck in the wood,
please stop the saw immediately, and take the saw out
of the wood carefully. Restart the saw till the saw chain
reaches a stable speed, and then recut again.
• Operate the machine properly, activate the trigger
completely during use. And do not work continuously for a
long time to avoid overuse fatigue.

Important safety

How to read symbols (Fig. 2)
WARNING
1 Avoid bar nose contact.
2 Beware of kick back.
3 Do not attempt to hold saw with one hand.
4 Recommended cutting procedure. Hold saw properly with
both hands.

Intended use

This chain saw is for cutting wood and designed for use by
one person. It is designed only to be operated with the right
hand on the rear handle and the left hand on the front handle.
The chain saw is intended for sawing of trees, tree trunks,
branches, wooden beams, plants. Cuts can be sawed with
or across the grain. This product is not suitable for sawing
I
135
Fig. 2
GB
136