Assembly; Technical Regulations Concerning Gas Installations; Assembly Of The Device - Bartscher 3702303 Mode D'emploi

4. Assembly

4.1 Technical regulations concerning gas installations

•
All activities related to installation, assembly, service and maintenance must be
conducted by specialized personnel who hold all necessary licenses (producer
or seller's authorization). All such work should be performed in accordance
with legal regulations concerning installations, product safety and
occupational safety.
•
All gas attachments in the device meet the ISO 7 – 1 and/or ISO 228 – 1
standards.
WARNING!
All places where the device is to be installed must be equipped with appropriate
electrical and gas installations fulfilling local regulations. In addition, all possible
safety measures protecting people and property should be applied. In the event of
failure to do so, the producer shall bear no liability.

4.2 Assembly of the device

•
The device must be located in a closed, well-ventilated space (not in an open-air
facility!).
•
Place the device on a stable, level surface of stainless material. This surface should
be designed so as to prevent dripping of grease through the main base onto the floor.
Never place the device on surfaces made of plastic or wood.
•
If the device is to be located near a wall, dividing wall, kitchen cabinet, decorative
screen or other similar object, ensure that these objects are made of non-flammable
materials.
If they are not, they should be impregnated with non-flammable materials, pursuant
to all fire safety regulations. Keep a minimum distance of 20 cm from walls.
•
The gas grill connections should be installed in accordance with applicable regulations.
WARNING!
The room in which the device will be used must be well-ventilated. The ventilation
must be made of non-flammable materials resistant to high temperatures and
equipped with a fume hood.
- 27 -