Pluggit AeroFresh Plus Manuel D'utilisation Et D'installation page 14

3. Connect hygrostat (10) and hygrothermal transducer
(11) according to circuit diagram, see page 14.
4. Fasten steam hose (7) to humidifying line (12) and se-
cure it using a hose clamp.
5. Insert condensate line (13) in humidifying line (12) and
clip in a funnel or a siphon (14) using a siphon loop.
Note:
Take care to correctly guide the steam hose (7) and the
condensate line (13), see page 13.
12
BIA AeroFresh Plus
10
12
7
4
14
6. Connect humidifier (1) to the power supply system.
7. Fully open stopcock or angle valve (4).
11
13
1
M+P-26A-1017