Pluggit AeroFresh Plus Manuel D'utilisation Et D'installation page 12

5
3. Insert hygrostat (3) in humidifying line (1).
4. Set absolute humidity using the rotary knob (4).
Note:
Pluggit recommends that you set the absolute humidity
to 80 % to ensure a higher degree of safety.
5. Connect supply air lines (5) to humidifying line (1) made
of IsoPlugg insulating duct or PluggFlex hose.
If you use a PluggFlex hose, secure it using hose
clamps (6).
6. Place hygrothermal transducer (7) in exhaust air line (8)
and secure it using holder (9).
10
BIA AeroFresh Plus
1
6
8
5
6
3
9 7
8
4
M+P-26A-1014