Teuco Easy Manuel D'utilisation page 9

CLEANING OF SURFACES
See CLEANING INSTRUCTIONS manual attached.
CLEANING THE JETS
Dismantle the jets using the special keys (A) and (B) provided.
Clean with descaler, and rinse with clean water.
Be certain to locate the pins of the key (B) in the relative holes.
When reassembling the jet, take care that the seal (2) is correctly
seated in the groove of the jet.
To ensure smooth operation of the jet, tighten the nut (1) without
forcing.
QUICK DESCALE
Brush a hand across the spray holes to remove scale deposits.
MULTIFUNCTIONS
MAINTENANCE
GB
A
B
2
1
9