Setting Brightness, Contrast, Colour, And Volume; Muting Function; Sleep Mode - Conrad 75 15 92 Notice D'emploi

13. Setting brightness, contrast, colour, and
volume
To increase or decrease the volume, press the "V+" button or the "V-" button (12) on the remote control.
You can also use the "V+" button (6) or the "V-" button (6) on the monitor to increase or decrease the
volume.
Press the SELECT button (5) on the monitor or the SELECT button (16) on the remote control to change
the settings for brightness (menu item = BRIGHT), colour (menu item = COLOR), contrast (menu item =
CONTRAST) or volume (menu item = VOLUME).
Press the SELECT button (5) on the monitor or the SELECT button (16) on the remote control until the
desired menu item appears. Use the "V-" button (7) and the "V+" buton (6) on the monitor or "V-" and
"V+" (12) on the remote control to decrease or increase the desired value.

14. Muting function

Press the MUTE button (14) on the remote control to deactivate the audio output of the loudspeaker (9).
To reactivate the audio output, press the MUTE button (14) on the remote control again.

15. SLEEP mode

You can set a time for the monitor to automatically shut down. If a time is set, SLEEP mode is activated.
By default SLEEP mode is deactivated (default = OFF).
You have the following setting options:
OFF > 15 > 30 > 45 > 60 > 75 > 90 > 105 > 120 > OFF
Select the desired setting by repeatedly pressing the SLEEP button (18) on the remote control
(the numbers stand for minutes, OFF deactivates SLEEP mode).
29