Wall Or Ceiling Installation - Conrad 75 15 92 Notice D'emploi

8.2 Wall or ceiling installation

When installed on the wall or ceiling the base must
be mounted firmly.
Proceed as follows to mount the monitor on the wall or ceiling:
• Choose a suitable mounting place for the monitor.
• There are 3 mounting holes on the base. Hold the base against the wall or ceiling and mark the drill
holes (e.g. using a pencil).
• Drill the mounting holes.
• Use suitable installation material to mount the base on the wall or ceiling.
• Screw the thread (A) of the base into one of the two attachment holes (10) by turning the attachment
screw (B) clockwise.
• Adjust the position of the monitor as desired.
• Tighten the attachment screw (D).
By repeatedly pressing the MIR button (4) on the monitor or the MIR button (13) on
the remote control, you can adjust the display (e.g. flipping it).
Also see chapter "11. MIRROR function"
26