endolite ECVT22L1 Instructions D'utilisation page 15

8 Maintenance Instructions
1
Remove
the rotation
stop screw
Clean and relubricate bearing surface.
Use Sapphire Endure ( 928015) or equivalent PTFE loaded grease.
Re-assembly:
Ensure the rotation stop screw aligns with the slot in the pylon
apply Loctite 243 and tighten.
Replacement Gaiter available Part No. 534003
(cont.)
2
Slide the pylon
sleeve and gaiter
from the spring
housing
Slot
14 938315/4-0615