Product Introduction - MCS Master DH 7160 Manuel D'utilisation Et De Maintenance

BG
1... BEfORE USE
CZ
2... CONSTRUCTION
DE 3... OPERATION
4... MAINTENANCE AND SAfETY
DK
5... NOTICES ABOUT UNIT OPERATION
6... ELIMINATION DE DéTéRIORATIONS
EE
ES
FI
►► 1. BEFORE USE
►
FR
► dehumidifier should be transported upright
► please do not cut off the power by pulling the
GB
wire
► please do not plug or unplug to startup or
HR
shut off the unit
► please be careful when moving the unit, do
HU
not mangle the wire
► please do not put fingers or sticks into the grid
IT
► please prohibit child to climb, stand or sit on
the unit
LT
► please unplug the unit before cleaning or
LV maintenance
NL
NOTICE: wE SUGGEST THAT ANY RE-
PAIRS SHOULD bE ExECUTED bY PRO-
NO
FESSIONAL SERVICEMEN
► please make sure the unit is grounded
PL
► please do not use unit in airproof conditions
► please follow the instructions thoroughly
RO
► The device has no water tank therefore you
must ensure proper condensate drain on your
RU
own.
SE

PRODUCT INTRODUCTION

Dehumidifiers can reduce air humidity in room
SI
and thus make people live comfortably and
goods stored properly. Due to their neat appear-
SK
ance, compact configuration, high quality and
easy operation, our dehumidifiers are widely
UA
used in research institutions, industry, transpor-
SE tation, medical centers, measuring institutions,
stores, underground constructions, computer
SI
rooms, archives, warehouses, bathrooms, etc.
Keeping apparatus, meters, computers, com-
SK
munication equipments, drugs and files away
from moisture, eroding, and mildew.
CONTENTS
►► 2. CONSTRUCTION
►
► Dehumidifier FIG. 1
1. Control panel
2. Air inlet grille with the filter
3. Handle
4. Wheel
5. Water drain pipe
6. Air outlet grille
► Control panel FIG. 2
1. humidity display
2. operate indicator
3. defrost indicator
4. memory indicator
5. memory
6. humidity up
7. humidity down
8. on/off button
►► 3. OPERATION
►
KEYS:
► ON/OFF: Press ON/OFF, the unit runs in a
circulation "ON-OFF-ON".
► Humidity up and down: Press "humidity up
and down" for once, the set humidity will in-
crease or decrease by 1%. Press the key for
1.5 seconds and the set value will increase or
decrease by 1%. Press continuously with the
speed 5 points per second.
► Memory Key: Press the memory key and the
memory indicator will light on to start the func-
tion of memory when the power cuts off. Press
the memory key again; the memory indicator
dies to shut off the function of memory when the
power is cut off.
START ON:
► Plug on the unit gives off "di".
► Press "ON/OFF", the running indicator lights
INSTRUCTION OF