Zero Weight Display Condition - Gram CM Série Manuel D'utilisation

UF-6 Transmission Format RS-232
1. Press the
2. Use the ▲ key to select the desired mode and press the
3. Use the ▲ key to select baud rate and the
4. To continue with other setups use the ► key.
5. To exit menu and return back to weighing mode, press the
UF-7 ADC Update Rate
SPEEd 1 Standard speed 15 hz
SPEEd 2 High Speed 30 hz
SPPEd 3 Low speed 7.5 hz
• This function is locked when the function HOLD is set as HOLD 1
Factory default: SPEEd 1
1. Press the
2. Use the ▲ to select the desired ADC speed.
3. To continue with other setups use the ► key.
4. To exit menu and return back to weighing mode, press the
UF-8

Zero Weight Display Condition

ZP 0 Function Off
ZP 1 1 division not to display at zero
ZP 2 2 divisions not to display at zero
ZP 3 3 divisions not to display at zero
ZP 4 4 divisions not to display at zero
ZP 5 5 divisions not to display at zero
• This function is locked when the function HOLD is set as HOLD 1
Factory default: ZP 0
key.
key to start setting up.
key.
key to confirm.
key.
key.
14