Numark MIXTRACK PLATINUM FX Guide D'utilisation page 6

Operation
Performance Pad Modes
The upper row of pads has different functions depending on their mode: Cue, Auto Loop
Mode, Fader Cuts, and Sample Mode. To select a mode, press one of the Pad mode buttons
and press one of the upper pads to activate a specific function.
Cue Mode: Press the pad marked Cue and press a lit pad from the upper 4 pads to return a
track to the assigned Hot Cue Point. Press an unlit pad from the upper 4 pads to assign a Hot
Cue Point at the desired point in your track.
Auto Loop Mode: Press the pad marked Auto Loop to assign the upper 4 pads to the
functions listed below:
• Auto 1: Sets and starts playback of a 1-beat auto loop.
• Auto 2: Sets and starts playback of a 2-beat auto loop.
• Auto 4: Sets and starts playback of a 4-beat auto loop.
• Auto 8: Sets and starts playback of an 8-beat auto loop
Fader Cuts: The pads will
mute and unmute the deck's
audio signal in a way
that emulates crossfader
movements toward that deck.
CUE AUTO LOOP FADER CUTS SAMPLE
Sample Mode: Press the pad marked Sampler to assign the upper 4 pads to play a sample.
Press Shift and one of the upper four pads to stop playback, or to load a sample if the slot is
empty.
6