Play/Pause; Selecting A Track Via The Track-Encoder - Omnitronic CMP-1000 Mode D'emploi

1. AUTO CUE
Auto Cue is activated.
2. SINGLE
Single title replay
3. RELOOP
Sequence has been memorized
or is played.
4. FOLDER
Folder number
5. TRACK
Track number
6. TIME MODE INDICATORS
Elapsed, remain, total remain time
displayed in minutes (M), seconds (S)
and frames (F).
7. GRAPHIC INDICATOR
Elapsed or remaining track time
8. PITCH
Speed adjustment in %.
9. MAIN TEMPO
Main Tempo function is activated.
(1) After switching on, the display shortly indicates the total time and the total number of tracks.
(2) Afterwards, the track remain time is displayed numerically in minutes (M) and seconds (S). The seconds
are divided into 75 frames (F). Next to "TRACK" or "FOLDER", the title or folder number selected is
indicated.
(3) For MP3 titles, the file name of the title selected is indicated in the text line.
(4) Above the numerical time indication, 10 bars are displayed showing the remaining track-time visually.
The shorter the track remain time becomes, the less bars are displayed. 15 seconds before the track-
end and in single mode, the bars in the display start flashing.
(5) By using the Time-button, the time-indication can be switched from track remain time (Remain) to total
remain time (Total Remain) to track playback time (Elapsed).
(6) After reading in a CD or after selecting a title, the CD player is precisely on the section where the music
starts and not at the time index 0:00:00. This spot is automatically memorized as a starting point. The
display shortly indicates „A.CUE" for Auto Cue.
(7) The indication "0.0%" means that the playback speed has not been changed. If you adjust the playback
speed via the Pitchfader (Pitch-LED is flashing), the respective percentage is indicated in the display.
(8) By pressing the SGL/CTN-button, the CD-player is put into Single-mode and the display shows
"SINGLE".
(9) After switching on, AUTO BPM mode is active. As soon as the beat counter has determined the number
of beats per minute, it is indicated on the display. During the counting procedure, „---.-„ is indicated. If the
beatcounter is not able to determine a useful value (e.g. in case of classical music or calm music titles),
press the TAP-button to the beat of the music until the BPM value is indicated.

6.4 Play/Pause

(1) In Pause-mode the time-indication in the display stands still and the Play/Pause-LED flashes. The
playback of the first track can be started by pressing the Play/Pause button. In the Playback-mode, the
time-indication in the display is running and the Play/Pause-LED shines permanently.
(2) To interrupt playback, press the Play/Pause-button and the laser stops at the position where you
stopped.

6.5 Selecting a track via the Track-Encoder

(1) You can select the desired track via the Track-encoder in pause-mode or play-mode. By turning the
encoder once, you can select either the next higher or lower track, depending on the turning direction. In
order to play a track from the beginning, press the Track-Encoder until the desired track number is
displayed. If you hold the Track-Encoder, the CD-player will run through the track numbers until you
release the button. Note: The CD-player calls the track up in the mode you pressed the Track-Encoder.
10. BPM
Manual beatcounter is activated.
11. BPM Indicator
Beats per minute of the current title.
12. AUTO BPM
Automatic beatcounter is activated.
13. TEXT LINE
Indication of track and file information
of the CD.
14. CUE
Lights when unit is at cue point.
Flashes when new cue point is set.
15. MP3
Title in the MP3 format is recognized.
16. PAUSE
Unit is in pause mode.
17. PLAY
Unit is in play mode.
18. CD
CD is inserted.
30/63 10602405_V_1_0.DOC