Controller - Omnitronic CMP-1000 Mode D'emploi

REAR PANEL
4 5 6 7 8
4. DIGITAL OUT-SOCKET
The music-signal of this socket is digital. Connect the output to the respective input of a digital amplifier for
example.
5. AUDIO OUT-SOCKETS
The music-signal of these sockets is analog. Connect the output to the respective input of your mixer.
6. AC CONNECTION
Plug in the power supply cable here.
7. VOLTAGE SELECTOR
Make sure that the indication corresponds to the available voltage.
8. REMOTE CONTROL
Connect this socket via the supplied cable to the Remote-Socket of the controller unit.

4.4 Controller

In order to design this user manual as structured as possible, only one side of the controller is described.
The operation of the two player mechanisms is identical.
FRONT PANEL
1. SECTION UNIT 1
The left part of the controller is designed for controlling the left CD-player.
2. SECTION UNIT 2
The right part of the controller is designed for controlling the right CD-player.
3. TIME-BUTTON
By using the Time-button, the time-indication can be switched from track remain time (Remain) to track
playback time (Elapsed) or total remain time (Total Remain).
26/63 10602405_V_1_0.DOC