Selecting The Compression Setting For The Sound; Dynamic; Selecting The Colour System For The Line Output Video Signal; Color System - Sony MV-90MDV Mode D'emploi

Selecting the compression
setting for the sound

— DYNAMIC

You can select the compression setting for the
sound. If you set the DYNAMIC setting to
"OFF" and watch an exciting movie, you can
enjoy dynamic sound to its best effect.
However, for example, if the sound is too
dynamic and loud to hear low level sound
such as human voices, try adjusting the
dynamic range.
1
Press (SETUP).
The main page for setup appears.
2
Press M or m repeatedly to select "AUDIO
SETUP," then press (ENTER).
3
Press M or m repeatedly to select
"DYNAMIC," then press ,.
-- AUDIO SETUP - -
AUDIO OUT
DYNAMIC
MAIN PAGE
DYNAMIC RNG COMPRESSION OFF
4
Press M or m repeatedly to select the
desired item from "FULL," "HIGH," "MID"
or "LOW."
5
Press (ENTER).
To turn off the dynamic range of sound
volume, select "OFF" in step 4.
To return to normal play screen, press
(SETUP) anytime.
Note
To return to the main page for setup, press M/m/<
repeatedly to select "MAIN PAGE," then press
(ENTER).
Selecting the colour
system for the line output
video signal
The player can output NTSC or PAL video
singnals.
1
Press (SETUP).
The main page for setup appears.
2
Press M or m repeatedly to select
"PREFERENCES," then press (ENTER).
3
Press M or m repeatedly to select "COLOR
SYSTEM," then press ,.
FULL
SET PREFERENCE
HIGH
MID
4
Press M or m repeatedly to select the
LOW desired item from "NTSC" or "PAL."
OFF
5
Press (ENTER).
"SET TO NTSC" is displayed at the lower
left on the screen, for example if you select
"NTSC" in step 4.
To return to normal play screen, press
(SETUP) anytime.
Note
To return to the main page for setup, press M/m/<
repeatedly to select "MAIN PAGE," then press
(ENTER).

— COLOR SYSTEM

-- PREFERENCES PAGE - -
COLOR SYSTEM NTSC
AUDIO
PAL
SUBTITLE
DISC MENU
PARENTAL
PASSWORD
DEFAULTS
SMART NAVI
31