Changing The Player And Monitor Settings - Sony MV-90MDV Mode D'emploi

Changing the player and
monitor settings
VOL +/–
Turning off the speaker sound
from the player
1
Press (MENU) repeatedly to select
"Speaker."
Each time you press (MENU), the setting
screen changes as follows:
Speaker t IR HP t FM Modulator t
Picture t Brightness t Color t
Hue* t Dimmer t Video Adjust t
Mode t Blue Back t Menu Off
* "Hue" appears only when the NTSC colour
system is selected (page 14).
Speaker;
+
/–
Press or MENU.
2
Press (VOL) (+) or (VOL) (–) to select
"Off."
REVERSE MENU
On
To deactivate the cordless
headphones
1
Press (MENU) repeatedly to select "IR
HP."
IR HP;
+
/–
Press or MENU.
2
Press (VOL) (+) or (VOL) (–) to select
"Off."
Setting the FM modulator
You can transmit the audio signals to the FM
radio and output the signals from the car
stereo. Do the procedure below to turn on or
off the FM modulator and select the frequency.
1
Press (MENU) repeatedly to select "FM
Modulator."
2
Press (VOL) (+) or (VOL) (–) to select
"Low," "Middle," "High," or "Off."
Select the FM modulator output level
according to the input sensitivity of the car
stereo's radio.
3
To select the frequency, press
(REVERSE).
The "Frequency" screen appears.
Frequency 88.3MHz
+
/–
Press , MENU or Rev.
4
Press (VOL) (+) or (VOL) (–) to select the
frequency.
The settable range is 88.3 MHz to 89.9 MHz,
in 0.2 MHz steps.
continue to next page t
On
15