Display Of The Minimum/Maximum Measured Values - Conrad VOLTCRAFT Lux DL-230L Notice D'emploi

g) Display of the minimum/maximum measured values
• Press the "ENTER" button (8) to call up the read mode for the maximum and minimum values.
• Press the "ENTER" button (8) to toggle between the maximum and minimum measured values in the selected
recording and to go back to the normal measurement display. Each time you press the button, the display toggles.
"MAX" indicates maximum value and "MIN" indicates minimum value.
Maximum and minimum measurements are recorded from the moment recording starts.
The data logger checks and updates the last measured value(s) on the display unless the limit pause function has
been enabled.
Maximum and minimum readings will stop updating when the device stops logging.
56
Briefly press the
"ENTER" button
(8) →
Briefly press the
"ENTER" button
(8) →