Intended Use; Delivery Content - Conrad VOLTCRAFT Lux DL-230L Notice D'emploi

3. Intended use

The data logger allows measurement of illuminance in lux or foot-candle (fc). The internal memory can automatically
store up to 31,320 measured values. The device configuration such as storage interval or different start modes can be
programmed online via a web-based user interface. There is no need to install any software. If an online connection is
not available, the configuration can also be carried out using the standard software supplied.
The measuring range is 0 – 40000 lux/fc. The data logger interval can be preset from 10 seconds to 24 hours. An LC
display shows the current measured value.
The data logger is powered by a commercially available 3 V lithium round-cell battery (type CR2450). Only use bat-
teries of the specified type.
The product is connected to a computer like a commercially available USB removable disc and read there. It automati-
cally creates a graphic report in PDF format and a tabular report in CSV format.
Measurements in potentially explosive atmospheres (Ex) are not allowed. The device is dust-tight and water-jet proof
(IP65) when the USB protective cap is fitted.
Using this product for purposes other than those described above may damage the product and result in a short
circuit, fire or electric shock. The product must not be modified or reassembled!
Read the operating instructions carefully and keep them in a safe place for future reference.
Always observe the safety information in these instructions.

4. Delivery content

• Data logger with USB protective cap
• CR2450 3 V lithium round-cell battery
• Safety information
• CD with operating instructions and standard software
Up-to-date operating instructions
1
Download the latest operating instructions via the link www.conrad.com/downloads or scan the QR
code. Follow the instructions on the website.
36