Technical Data - Conrad VOLTCRAFT Lux DL-230L Notice D'emploi

22. Technical data

Measured value ................................................illuminance in lux or foot candle (fc)
Measuring range ...............................................0 – 40000 lux/fc
Resolution .........................................................1 lux/fc, 10 lux/fc
Accuracy ...........................................................< 10000 lux: ±(3% + 10 counts)
Display update ..................................................10 seconds
Sample rate/measurement interval ...................10 seconds to 24 hours, stepless
Memory .............................................................31,320 measured values
Interface ............................................................USB 2.0 connector
Protection class ................................................IP65 dust-tight and water-jet proof
Power supply ....................................................1x CR2450 3 V lithium round-cell battery
Current consumption ........................................nominal approx. 40 μA (data logger operation)
Operating conditions .........................................+5 to +40 °C (+41 to +104 °F)
Storage conditions ............................................-10 to +60 °C (+14 to +140 °F)
Weight ..............................................................approx. 53 g
Dimensions (L x W x H) ....................................110 x 37 x 19 (mm)
Measuring tolerances
Accuracy in ± (% of reading + display error in counts (= number of smallest points)). These accuracy readings are
valid for one year at a temperature of +23 °C (± 5 °C) and a relative humidity of less than 75% (non-condensing).
Temperature coefficient: +0.1 x (specified accuracy)/1 °C.
The accuracy of measurements may be affected when the device is used in a high-frequency electromagnetic field.
≥10000 lux: ±(10% + 10 counts)
(with attached USB protective cap)
<80% relative humidity, non-condensing
<70% relative humidity, non-condensing
63