Connecting The Audio Input Aux In; Connection Of The Power Supply - Renkforce RF-DAB-CAR1 Notice D'emploi

When the audio output AUX OUT (10) is used, the FM transmitter is automatically
turned off.
c) Connecting the Audio Input AUX IN
You can connect an external audio device (e.g. portable MP3 player) to the audio input
AUX IN (9) whose signal is played back via the car radio.
• Connect the audio input AUX IN (9) with the headphone output or the audio output of the
external device.
• Use a suitable 3.5 mm jack cable.
d) Connection of the Power Supply
In some vehicles, the cigarette lighter is not switched on and off via the ignition.
This can lead to a discharge of the vehicle battery. In this case, remove the
cigarette lighter adapter or gooseneck from the cigarette lighter if you do not need
the car receiver.
• Connect the small plug of the supplied USB cable to the USB port for the power supply (11).
• Connect the large plug of the supplied USB cable to one of the USB ports on the gooseneck
cigarette lighter adapter or the separate cigarette lighter adapter (depending on the
mounting method selected).
The second USB port on the cigarette lighter adapter or gooseneck can be used to
charge another device (e.g. a smartphone). The total load capacity of both USB
outputs together is 3 A.
35