Audio Streaming - Renkforce RF-DAB-CAR1 Notice D'emploi

Accepting/rejecting an incoming phone call
• For an inbound phone call, the display (7) shows the number of the caller.
If the caller suppresses his caller ID or the mobile phone network does not support
this feature, the caller ID cannot be displayed.
• Press the button SRC /
• Press the button
Establishing a phone call
• Dial the desired phone number on your mobile phone.
• The car receiver automatically switches to Bluetooth
the display (7).
Ending a phone call
• Press the button

Audio streaming

Audio streaming is the transmission of audio data (music) by Bluetooth
If you have an A2DP-capable mobile phone, you may connect it to the car receiver by pairing
as described above and establish an audio transmission.
• Ensure that the two devices are connected by pairing.
• Start playback at your mobile phone (see corresponding operating instructions).
• Push the button SRC /
• The audio transmission is now active.
• You can now remote-control playback of your mobile phone with the buttons PS/
PL / (5) and
(1) to accept an incoming phone call.
/ (6) to reject an incoming phone call.
/ (6) to terminate a call.
(1) until Bluetooth
/ (6) as during playback from USB storage media.
mode and shows the call process in
®
is shown in the display (7).
®
to the car receiver.
®
(2),
41