Publicité
7.
Regulatory
Below Hazardous Location information applies only to the
931S-A3A2D-OP Monitoring Passive Converter
ATEX - Approval
UL DEMKO 09 ATEX 0929065X
II 3G Ex nL IIC T4
T
WARNING
WARNING
WARNING
WARNING
for selected Signal Conditioners
A.
"This equipment is suitable for use in Class I, Division 2, Groups A, B,
C and D hazardous locations or nonhazardous locations only or the
equivalent."
B.
"WARNING: EXPLOSION HAZARD - Substitution of components may
impair suitability for use in Class I, Division 2 environments."
C. "WARNING: EXPLOSION HAZARD - The area must be known to be
nonhazardous before servicing/replacing the unit and before installing
or removing I/O wiring."
D.
"WARNING: EXPLOSION HAZARD - Do Not disconnect equipment
unless power has been disconnected and the area is known to be
nonhazardous."
8
UL Class 1, Division 2 Markings
Rockwell Automation
1201South Second Street
Milwaukee, Wi 53204
U.S.A.
Publicité
