Detaching And Attaching The Front Panel; Resetting The Unit; Fuse Replacement - Sony MEX-N5200BT Mode D'emploi


Notes
• If the catches are straight or bent outwards, the
unit will not be installed securely and may spring
out.
• Make sure the 4 catches on the protection collar
 are properly engaged in the slots of the unit.
Mounting the unit in a Japanese car
You may not be able to install this unit in
some makes of Japanese cars. In such a
case, consult your Sony dealer.
TOYOTA

to dashboard/center console
Bracket
Existing parts supplied
with your car
NISSAN

to dashboard/center console
Bracket
Existing parts supplied
with your car
42
GB
Note
To prevent malfunction, install only with the
supplied screws .

For details, see "Detaching the Front Panel"
(page 8).
For details, see "Resetting the Unit" (page 8).
When replacing the fuse,
be sure to use one
matching the amperage
rating stated on the
original fuse. If the fuse
blows, check the power
connection and replace the
fuse. If the fuse blows again after
replacement, there may be an internal
malfunction. In such a case, consult your
nearest Sony dealer.
Bracket

Bracket

Detaching and attaching the front
panel

Resetting the unit

Fuse replacement

Fuse (10 A)