Installation recommendations
Pre-drill all screw connections in order to avoid
damaging the wood parts.
The following symbol will remind you to do this
in the instructions:
Technical data:
- External dimensions W x D x H :
- Power in infrared operation:
- Power in sauna operation:
- Connection :
- Pre-heating time infrared operation:
- Energy consumption infrared operation:
- Pre-heating time sauna operation:
- Energy consumption sauna operation: approx.
Tool
You should have the following tools to hand before beginning assembly:
Spirit level
Spring tape measure
Mitre saw/hand disk saw
Abbreviations / Symbols
cm
mm
ca.
Technische. Änderungen vorbehalten!
Drill
Electric screwdriver
Allen key
Centimetre
Millimetre
approximately/approx.
Supply air
Outgoing air
Design variant
Not included in delivery!
Follow the operating instructions of the IR controller!
Cable from item 1 = floor element
212 x 121 x 199 cm
3336 W
3600 W
230 V~16 A
approx. 45 min. at 20°C ambient temperature
approx. 2.7 KWh for 90 minutes of use
approx. 30 min. at 20°C ambient temperature
10.8 KWh for 4 hours of use
Pencil
Universal cutter
8
Screwdriver
Hammer
Copyright HRB3662