Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
PSB
3.2 Emergency information
4 Scope of delivery
• Cutting torch body (type as ordered)
• Cable assembly
Tab. 8
Scope of delivery
5 Putting into operation
5.1 Functional description
WARNING
Describes a potentially dangerous situation. If not avoided, it may result in
serious injuries.
CAUTION
Describes a potentially harmful situation. If not avoided, it may result in slight
or minor injuries.
NOTE
Describes the risk of impairing work results or the risk that the work may
result in material damage to the equipment.
In case of emergency, immediately interrupt the power supply: Further
measures can be found in the "Power source" operating instructions or in the
documentation of further peripheral devices.
The standard scope of delivery includes the following components:
Order data and ID numbers for the equipment parts and wear parts can be
found in the current ABICOR BINZEL spare parts and wear parts lists. The
contact for consulting and ordering can be found on the Internet at www.binzel-
abicor.com.
The plasma-cutting torches of the PSB series are exclusively intended for the
cutting of low- and high-alloy materials using compressed air for industrial or
commercial use by trained operators. These plasma torches are air-cooled
cutting torches.
All elements together form an operating unit which provides a plasma arc for
cutting when supplied with the appropriate operating resources. When cutting,
compressed air is ionized in the cutting nozzle. In PSB 31 KKS and KZS, this is
• Handle
• Operating instructions
4 Scope of delivery
EN - 7
Publicité
Table des Matières
