Product Description; Designated Use; Technical Data - Abicor Binzel MB GRIP 15 AK Mode D'emploi

2 Product Description

2 Product Description

2.1 Designated use

2.2 Use contrary to the designated use

2.3 Technical Data

Plasma cutting /gouging
Transport and storage
Relative humidity
Tab. 2 Ambient temperature
Application process
Type of use
Type of voltage
Protection type of the
machine-side connections
Voltage rating
Type of cooling
Tab. 3 Technical Data
EN - 4
The PSB manual cutting torches and AUT PSB automatic cutting torches are
used for safe plasma cutting or gouging of low- and high-alloy materials.
Designated use also includes the observance of the prescribed operating,
maintenance and servicing instructions.
Any use other than that described under "Designated Use" is considered
contrary to the designated use. Unauthorised conversions or power increase
modifications are not allowed.
PSB 31
PSB 60
PSB 121
IP3X (EN 60 529)
- 10 °C to + 40 °C
- 25 °C to + 55 °C
up to 90 % at 20 °C
AUT PSB 60
AUT PSB 121
Plasma cutting, plasma gouging
manual
DC direct voltage
Peak value of 500V
air-cooled
PSB
automatic
IP2X (EN 60 529)