EUROM Force 1240 wet/dry Manuel D'utilisation page 13

1. Handle
2. Cable suspension, cable and plug
3. Cap (with motor)
4. Lock (2x)
5. Barrel
6. Big wheel (2x)
7. Pedestal
8. Little castor (2x, 1240: 4x)
9. Connection hose
10. ON / OFF – switch(es)
11. Tipping handle
12. Tipping shackle
13. Drain hose
Standard accessories
1. Hose
1a. Machine connection
1b. Tube connection
2. Tube (curved)(2x)
3. Dry floor nozzle
4. Wet floor nozzle
5. Dust brush
6. Crevice nozzle
Operation
 Put the machine-connection of the hose in the machine till the narrow part is in
total in the machine and clicks. Pressing the ribbed clamps on the connector will
enable you to disconnect the hose.
 After this, connect the accessories you
wish with a twisting force, see picture.
 For the vacuuming of liquid the motor
(which is situated in the cap) is provided
with a floater that is hanging under the
motor, in the barrel. For the vacuuming of
dry dirt and dust the motor is provided
with a filter with a basket that the floater
surrounds and in that way prevents that
dust enters the mechanic system (see
picture). Do you want to vacuum liquid,
remove than the filter wit basket by
opening the locking blocks, to lift and turn
13