Technical Data - HASE Luno B.13 Mode D'emploi

26. Technical Data

The Luno B.13, certified in compliance with DIN-EN 13240 und Art. 15 a B-VG (Aus-
tria), can only be operated when the fire box is closed. Conforms with the DIBt (Deutschen
Institut für Bautechnik/German Institute for Building Technology) approval criteria for direct
vent fireplaces for solid fuels. Multiple allocation of the chimney is possible, but with
independent flue operation or external air supply only single allocation is permitted.
VKF-No.: 24259; Inspection Report No. (A): FSPS-Wa 2191 -A
DIBt approval number: requested / Typ FC
The following data applies to the chimney characteristics in accordance with EN 13384-1 / 2
Combustion Values
Nominal Thermal Output
Waste Gas Mass Flow Rate
Waste Gas Outlet Temp.
Min. Supply Pressure at Nominal Thermal Output
CO content at 13% O2
Efficiency
Particulate
Depending on the insulation of the building, the nominal thermal output of 5,5 kW indica-
ted on 17 bis 68 m² (subject to change)
Dimensions:
Stove 115,5 - 119,5 cm
Fire box
Weight (Steel/Ceramic/Natural stone)
¹Vertical flue pipe length
Flue pipe diameter
Pipe diameter of Hase ventilation system*
* For separate air supply in low-energy houses and insufficient combustion air supply in the room
68
where the stove is installed.
und FC
41x 51x
Wood
5,5
5
310
12
809
80,2
15
Height Width
51 - 54,5 cm
36 cm 33 cm
Front view
Ceramic/Natural stone:
kW
g/s
˚C
Pa
mg/m³
%
mg/m³
Top view
Depth
Ceramic/Natural stone:
44,5 cm
29 cm
123/139/170 kg
min. 25 cm
15 cm
10 cm
Side view
Ceramic/Natural stone:
54,5
Inst. of Hase air system below: 18,5
Dimensions in cm