Installing/Replacing The Autoclose - Dometic Saneo B Notice D'utilisation

Saneo B, Saneo C
➤ If necessary, remove the components of the Autoclose with the markings "CW"
and "CCW".
➤ Lift the lid.
➤ Use both hands to grasp the lid above the hinges (3) and bend it slightly toward
the bowl to detach it.
➤ Lift the seat.
➤ Use both hands to grasp the seat above the hinges (3) and bend it slightly toward
the bowl to detach it.
8.7

Installing/replacing the Autoclose

The Autoclose is integrated in Saneo Comfort models. With Saneo Basic models,
this function can be retrofitted.
I
NOTE
The manufacturer accepts no liability for damage resulting from incor-
rect or faulty installation.
➤ Use a screwdriver to carefully pry the lid (fig. v 1, page 13) out of its mounting
and remove it.
➤ Lift the lid and seat.
➤ If necessary, remove the components of the Autoclose with the markings "CW"
and "CCW".
➤ Insert the new parts of the Autoclose (fig. w, page 14).
➤ Lower the lid by tapping it.
✓ The seat and lid lower slowly.
➤ Place the lid (fig. v 1, page 13) into the mounting.
EN
Maintenance
29