Starting Up The Device; Inserting/Changing Batteries - Maxx-world AP-3RP Mode D'emploi

Starting Up the Device

Remove the device and accessories from the packaging.
Check the items supplied for completeness and trans-
port damage. If you fi nd transport damage, do not use
the device (!), but contact the Customer Service depart-
ment immediately.

Inserting/Changing Batteries

Before you fi rst use the device, the batteries supplied
with the product must be inserted.
Replace the batteries in good time when the power of
the device starts to become weaker. You require 2 x 1.5
V batteries of the AA type.
The device must be switched off before you replace the
batteries (move switch to position 0).
2
1. Rotate the battery compartment cov-
er by 90° to the left.
2. Remove the battery compartment
cover from the device.
3. Insert the batteries into the battery
compartment. Pay attention to the
correct polarity (+/-), (see diagram
on the back of the device above the
battery compartment).
4. Replace the battery compartment
cover and turn it so that it shuts.
25