Mounting - ETNA AD590RVS Mode D'emploi

INSTALLATION

Mounting

A
N
K
K
K
A
L
F
EN 12
• Remove the three panels).
• Drill the holes, using the template as a guide.
K
• Then screw the hood to the wall using the plugs and screws.
• Fix the mounting bracket of the upper duct to the wall against the
ceiling.
• Connect the discharge pipe.
• Put the plug in the wall socket. Ensure that there is no tension on
the wall socket!
B
• Slide the upper duct into the lower duct.
• Let the ducts drop into the hood.
• Push the upper duct around the wall bracket and screw the wall
bracket on to the mounting bracket with the screws supplied.