Grease Filters; Carbon Filter; Lighting - ETNA AD590RVS Mode D'emploi

MAINTENANCE

Grease filters

Carbon filter

Lighting

Removing the grease filters
Switch off the electricity! Remove the plug from the mains socket
or turn the switch in the meter cupboard to zero. Remove the three
panels. Pull the grease filter towards you and tilt it forwards and down.
Replacing the carbon filter
The carbon filter must always be used if the cooker hood is not ducted.
1. Remove the three panels.
2. Remove the grease filters.
3. Attach the carbon filters to the filter.
4. Replace the grease filters.
Note:
• Saturation of the activated charcoal will eventually occur after
prolonged use, depending on the type of cooking and how
frequently the grease filter is cleaned.
• The carbon filter needs to be replaced at least every four months.
• The carbon filter cannot be washed for reuse. Saturated carbon is
not environmentally friendly. Change the filter regularly.
Faulty LEDs must be replaced by a professional installer.
EN 9