Electrical Connection; Mounting The Cooker Hood - ETNA AI752 Mode D'emploi

INSTALLATION
Connection

Mounting the cooker hood

EN 12
Electric connection
This appliance is fitted with an earthed plug, which
should be connected to an earthed wall socket.
Make sure the supply voltage ratings correspond with those stated on
the appliance data plate. The connection to the mains is carried out as
follows:
BROWN = L live
BLUE = N neutral
GREEN/YELLOW = earth
This canopy hood has been provided with a power plug. When installing
the hood, make sure that this plug remains accessible. We recommend
installing the wall socket out of view, behind the chimney cover.
Attention:
If you want to make a fixed connection, ensure that a multi-pole switch
with a distance between contacts of 3 mm is installed in the supply
cable.
The last pages of this manual show the steps for mounting the
cooker hood.
max. 140 cm