Mounting - ETNA AG161WIT Mode D'emploi

INSTALLATION

Mounting

Mounting the cooker hood on the side walls
• Check that the cupboards are sufficiently stable.
• Use drilling jig N2 to determine the position of the mounting holes.
The top of the jig is level with the top of the cooker hood. The front
of the jig is level with the front of the cooker hood excluding the
door panel.
• Drill the mounting holes in the cupboards. Filler pieces are supplied
for fixing the cooker hood to cupboards with a wall thickness of
16 mm. The supplied angle iron (Q) can be used to fill in the space
at the back between the cooker hood and the wall.
EN 11