General Safety Warnings; Symbols On The Product - ADEO Services A011044 Notice De Montage, D'utilisation Et D'entretien

2.1 GENERAL SAFETY WARNINGS

• Do not operate the chain saw near glass enclosures,
automobiles, trucks, window wells, drop-off s, etc. without
properly adjusting the aim of the discharge.
• Do not force or overload the product. It will perform better and
safer when it is used at the rate that it was designed to work at.
• If the product is already assembled, please make sure that
all screws are tightly fixed before using it. If the product
requires that you assemble it, please make sure upon opening
the package that all the elements needed for setting up the
product have been provided. If the product is damaged or has
defects, do not use it and take it back to the nearest store.
• The term "power tool" in the warnings refers to your mains-
operated (corded) power tool or battery-operated (cordless)
power tool.

2.2 SYMBOLS ON THE PRODUCT

EN
Complies with European standards: This symbol means that this appliance is compliant with
the applicable European directives, and a test of compliance with these directives has been
performed.
Single mark of circulation of products on the market of the Member States of the Customs
Union.
Ukrainian conformity marking
Electrical products should not be discarded with ho usehold products. Used electrical
products must be collected separately and disposed of at collection points provided for this
purpose. Talk with your local authorities or dealer for advice on recycling.
Caution / Warning.
264