Automatic Boost Function - Kuppersbusch TCA630FB Instructions De Montage Et D'utilisation

Operation

Automatic boost function

Power setting
1
2
3
4
5
6
7
8
9
22
Time (min:sec)
01:00
03:00
04:48
06:30
08:30
02:30
03:30
04:30
- : -
Automatic boost function
Parboiling takes place at power level 9 with the automatic boost function.
After a certain time the power level will switch down automatically to a lower
simmering setting (1 to 8).
When using the automatic boost function only the simmering setting with
which the food is to be cooked through needs to be selected since the
electronic unit switches down automatically.
The automatic boost function is suitable for dishes which are cold initially and
are then heated up at high power. These dishes do not need to be constantly
monitored when simmering (e.g. boiling meat for soups).
1. Press the ON/OFF key
2. Press the cooking zone selection key
power setting display for the selected cooking zone blinks.
3. Press the Plus key
and 9 will then blink alternately for a few seconds.
When the display is blinking, press the Minus key
lower simmering setting of 1 to 8. A and the selected simmering setting
will blink alternately.
4. The automatic boost function will operate as programmed. A will light up
constantly. After a certain time (see chart) the cooking process will be
continued with the simmering setting.
Notes
• The selected simmering setting can be called up while the automatic boost
function is in operation. To do so press the Plus key
.
• If, after activating the automatic boost function, the power level is left at
level 9 and no lower simmering setting is selected, the automatic boost
function will be switched off automatically after 10 seconds and the cooking
level will remain at 9.
until the power setting 0 appears.
several times so that the
once to immediately set the power level at 9. A
GB
in order to select a
or the Minus key