The Remote Control; Enable Delayed Switch-Off; Type And Replacement Of Batteries - Dal Zotto Valli idro Manuel Utilisateur

the reMOte cOntrOL

The remote control allows adjusting all that can normally be done through the LCD display
The table below shows the various functions in detail:
1
2
6
3 7
9
8
11
12
INFO
14
15
Note: the numbers shown on the remote control are purely explanatory and are not present on the remote control supplied with the product.

tyPe AnD rePLAceMent Of bAtterieS

The batteries are housed in the lower part of the remote
control.
To replace it, remove the battery holder (as indicated in the
figure at the back of the remote control), remove or
insert the battery, following the symbols on the
remote control and on the battery itself.
For operation, 1 CR2025, 3V lithium buffer battery is
required.
The batteries used contain metals harmful
for the environment. They must therefore
be disposed of separately in appropriate
containers.
1 On / Off
2 POWer increASe
3 POWer DecreASe
4 t° increASe
5 t° DecreASe
enAbLe/DiSAbLe
6
chrOnO
4
enAbLe DeLAyeD
7
SWitch-Off
5
8 Menu
9 increASe
10
10 eSc Key
11 reverSe
13
12 cOnfirMAtiOn Key
13 fOrWArD
16
14 enAbLe f1 functiOn
15 DecreASe
16 StOve StAtuS
Pressing the key for three seconds, the stove will switch-on or off
Pressing the key will increase the operating power
Pressing the key will decrease the operating power
This button allows increasing the temperature setpoint
This button allows decreasing the temperature setpoint
Press this button once to enable or disable the chrono
This button allows setting the delayed switch-off.
For example, if the stove is set to switch off in an hour, it shall switch off
automatically once the set time elapses, displaying the countdown every
minute.
this key provides access to the user and technical menu (the technical
menu is reserved for assistance)
This button allows increasing the temperature setpoint
This key allows the user to exit any program or display and return to the
main menu without storing the data
This button goes back in the display of the various menus
This key confirms the adjustments made during the user menu
programming phase
This key moves forward in the various menus
Button designed for future applications
This key decreases the value to be set
Press this key to view the general status of the stove
If the remote control is off because it has no
batteries, stove can be controlled from the
control panel on top of it.
While replacing the battery, pay attention to the
polarity by observing the symbol on the inside
compartment of the remote control.
| engLiSh
63