Frida Idro Hydraulic Connections - Dal Zotto Valli idro Manuel Utilisateur

friDA iDrO hyDrAuLic cOnnectiOnS

1. Remove the galvanised back
4. Remove the two caps, the ceramic
covering and the two sides
8. Connect the system return (T3) to
the machine. Refer to the template
for the correct position of the fittings
T3
12. Reposition the caps, the cast iron
cover and the ceramic covering
2. Remove the two steel sheets by
cutting the joints
5. First remove the left cast iron
cover and then the complete left
front panel
9. The stove must be about 10 mm
away from the wall
10
13. Re-position the 2 sides
6. First remove the 6 screws of the
right cast iron cover and then the
complete right front panel
10. Re-position the complete right
panel. Fix the right cast iron cover
using the 6 screws.
| engLiSh
3. Re-position the back
7. Connect the system flow (T2) to
the machine and the safety valve
pipe (T1). Refer to the template for
the correct position
T1
T2
11. Re-position the complete left
panel
49