cOntrOL bOArD
BUTTON
ON/OFF
1
2
3
OPERATING POWER
ADjUSTMENT
DiSPLAy icOnS
Indicates the receipt of the radio signal
On = during radio communication
Off = no radio communication
Flashing = excluded serial port
Indicates the presence of an alarm.
On: indicates the presence of an alarm
Off: indicates the absence of alarms
Flashing: indicates the deactivation of the depression sensor.
Indicates the water temperature status
Off = the T° read by the probe is over the set temperature set
On = the T° read by the probe is below the set temperature set
It indicates functioning of the fumes motor.
Off = flue gas motor deactivated
On = flue gas motor active
Flashing = breakdown (contact technical after-sales service)
It indicates functioning of the tangential fan (where present)
Off = not working
On = working
Flashing = motor at minimum
It indicates functioning of the pellet feed motor.
Off = pellet feed motor deactivated
On = pellet feed motor active.
It indicates pump functioning
Off = pump deactivated
On = pump active
Flashing = the safety device is active (h2O temperature > 85°C)
DISPLAY OF VARIOUS
TEXT MESSAGES
OFF
Indicates the stove modulation
On = the stove is working at the set power
Flashing = the power at which the stove is working is different to
the power set, the stove is modulating (for various reasons)
It indicates weekly programming functioning
Indicator on = Weekly programming active
Indicator off = Weekly programming not active
Indicates the contact of the external additional thermostat
On = closed contact: the contact of the external additional
thermostat is closed.
On = open contact: the contact of the external additional
thermostat is open.
Flashing with closed contact: the contact of the external additional
thermostat is closed and the STBY function is activated
Flashing with open contact: the contact of the external additional
thermostat is open and the STBY function is activated
| engLiSh
TO ACCESS
ThE MENU
6
4
5
TEMPERATURE
SETTING
-
-
-
-
61