Speedlink Ergo RF Keyboard SL-6491 Mode D'emploi page 10

Use of batteries:
D
• Keep batteries out of the reach of children.
GB
• Never use old and new batteries together or different types of
battery.
F
• Follow the instructions of the battery manufacturer concerning the
handling of batteries.
E
• Always replace old or weak batteries straight away.
• Dispose of and recycle used batteries in accordance with local laws
I
and recommendations.
3. Setting up
1. Switch off your computer.
2. Connect the PS2 plug of the receiver to the appropriate PS2 port of
your computer, identified with a keyboard symbol or purple colouring.
3. Switch on your computer. The operating system may ask you to insert
the Windows installation CD. Follow the instructions on the screen.
4. Now establish a connection between keyboard and receiver, see
section 4 for this.
4. Establishing a connection between keyboard and receiver
To establish a radio connection between keyboard and receiver, proceed
as follows:
1. Press the button on the top of the receiver, the LED will start flashing.
2. Press the sunk-in button located under the folding left foot on the
bottom of the keyboard, using a pointed object such as a pencil. The
LED will stop flashing.
If interference with other radio equipment occurs, simply repeat the
above steps 1-2. A different radio channel will automatically be used.
Note: Synchronisation has to be repeated each time the batteries are
changed. Complete the synchronisation procedure within 15 seconds
otherwise it will be necessary to repeat the above steps.
Press button
Battery compartment
10