Special Instructions - Husqvarna CG 200 S Manuel D'utilisation

This symbol indicates that the machine
is in conformance with the applicable
European directive.

SPECIAL INSTRUCTIONS

The disc cutter is designed to provide safe and
reliable service
corresponding with the instructions, but it can
present dangers for the user and risks of damage,
consequently regular on site inspection is necessary
to ensure:
• Perfect technical condition (use for the purpose
for which it is intended and taking into account
any risks, and correction of any malfunction
detrimental to safety).
• Use manufacturers' original drums. Do not use
any other drum whose shape, size and
mounting do not fit the planer.
• Competent staff (qualifications, age, training)
who have read and understood the manual in
detail before starting work: any electrical,
mechanical or other problem should be
investigated by a qualified maintenance
engineer (electrician, maintenance manager,
approved dealer, etc . . .).
• That the warnings and instructions marked on
the machine are followed (adequate personal
protection, correct use, general safety
instructions, etc).
• That no modification, transformation or addition
is detrimental to safety and that it is carried out
without prior
manufacturer.
• Respect of the maintenance intervals and
periodical checks recommended.
• That only genuine spare parts are used for
repairs.
Instruction plate
MANUFACTURER
T Y P E
TYPE
W I E G H T
M A S S E U T L I E
MAXI TOOL
Ø MAXI OUTIL
BORE
Ø ALESAGE
SPEED
T/MN - RPM
20
in operating conditions
authorization from
S E R A I
N° SERIE
FABRICATION
ANNEE DE
YEAR
FABRICATION
P O W E
K g PUISSANCE k W
VOLTAGE
PLAGE DE
mm V
TENSION
FREQUENCY
mm FREQUENCE Hz
INTENSITY
INT. UTIL. A
1 Use
USE :
• For scarifying, milling grooving, texturing,
cleaning and more.
• Effective on concrete, asphalt, paint and other
coatings, glue and steel.
TOOLS - Applications :
• Star Cutting Head :
- Cleaning/removal of epoxy paint, oil and
glazes, glue, thermo plastic road marking.
• Beam Cutting Heand :
- Dressing of asphalt and concrete.
- Anti-skid grooving (ramps, garages, farm
yards, etc).
- Descaling steel decking.
- Oil and glazes thermo plastic road marking.
• Carbide Cutting Heand capacity :
- Texturing of asphalt and concrete.
(Information from your usual supplier)
the
L
R