Detach Soft Goods - Joie i-Spin Safe Mode D'emploi

Detach the snaps on
the head support to
remove the head
portion of the insert.
We recommend using the full
infant insert while the baby
is under 60cm and can be used
until they outgrow the insert.
The infant insert increases
side impact protection.
5. Place the child into the enhanced child restraint and pass both arms
through the harnesses.
!
After the child is seated, recheck whether the shoulder harnesses
are at the proper height.
6. Engage the buckle. Please refer to
30
19
Remove the head support
portion of the infant
insert when the child's
head no longer fits
comfortably.
Remove the body
portion of the infant
insert when the infant's
shoulders no longer fit
comfortably.
1 Remove the infant insert
cushion by detaching the
snaps to allow more space
when the infant does not
fit comfortably. The cushion
can be used separately
2
without being attached to
the insert to bolster the
infant's back for more
comfort.
30
7. Pull down the adjustment
webbing and adjust it to the
proper length to make sure your
child is properly secured. 31
!
Always keep child secured in
harness and properly tightened by
removing any slack.

Detach Soft Goods

see images -
32 38
Press the red button to disengage the
buckle.
32
-
Follow steps to detach soft
33 38
goods.
To re-attach the soft goods please
repeat the above steps in the reverse
step.
33
31
32
34
20