Cleaning And Storage; Troubleshooting - Vitalmaxx CF-2506 Mode D'emploi

Cleaning and storage

ATTENTION!
■ Disconnect the device from the power supply each time before you clean it.
■ The massage seat pad and all accessories must not get wet.
■ Do not use corrosive or abrasive cleaning products to clean the device. They could
damage the surface.
• Make sure that the device is not connected to the power supply and that it has cooled
off suffi ciently.
• Only clean the device with a damp cloth.
• When storing the device, do not apply excessive pressure when folding it up and do
not use any force. It could be damaged as a result.
• Do not wind the mains cord around the mains adapter.
• Store the device and the accessories in the corresponding packaging in a dry area,
which is out of the sun and is not accessible to children and animals.

Troubleshooting

If the device does not work properly, fi rst check whether a problem can be fi xed by your-
self.
Do not attempt to repair a defective electrical device yourself!
Problem
The device
is not working.
No heat is produced.
17
Possible Cause
The device is not supplied
with power.
The button has not been
pushed (properly).
All massage zones are deac-
tivated on the controller.
The device is not switched
on.
The heating function is not
switched on.
Solution
Check whether
• all cables are properly con-
nected with one another.
• the mains adapter is con-
nected to the socket.
• the socket is defective.
• the fuse of the mains con-
nection has been inserted.
Push the button. The corre-
sponding LED must light up.
Push the button for a massage
zone to activate it. The corre-
sponding LED must light up.
Push the button. The corre-
sponding LED must light up.
Push the WÄRME (HEAT)
button. The corresponding LED
must light up.
EN