Operating The Device; Cleaning And Storage; Technical Data - Vitalmaxx C37-MP004 Mode D'emploi

Operating the Device

1. Connect the mains adapter to the connecting socket of the device.
2. Insert the mains plug into a plug socket that is easily accessible.

Cleaning and Storage

PLEASE NOTE!
■ The device may not be connected to the mains and must be completely switched
off for cleaning!
■ Do not use any caustic or abrasive cleaning agents for cleaning. These can damage
the surface.
• Wipe down the device just with a damp cloth if necessary. Then wipe it down fully
with a dry cloth.
• Do not wind the mains cable around the device or the mains adapter.
• Keep the device in its respective packaging in a dry place which is protected from
sunlight and is not accessible to children and animals.

Technical Data

Model number:
Article number:
Voltage supply:
Power:
Timer:
Protection class:
Mains adapter
Model number:
Input:
Output:
Protection class:
ID operating instructions: Z 09741 M DS V1 0419
17
3. Place the massage surface of the device onto the part
of the body which is to be massaged. For a shoulder or
back massage, place the straps of the device around
your shoulders and fi x them in place by putting your arms
through the loops and thus holding the device in the cor-
rect position.
4. Start the massage by pressing the
5. After 15 minutes the device automatically switches off. To
switch it off sooner, press the
6. Pull out the mains plug and store the device in a dry place
that is not accessible to children.
C37-MP004
09741
12 V
24 W
15 minutes
III
CP-1225
100 – 240 V ~ 50 / 60 Hz; max. 1 A
12 V DC; 2.5 A
II
button.
button.
EN