Coffee Maker - SEVERIN KA 4030 Mode D'emploi

Dear Customer
Before using the appliance, the user should
read the following instructions carefully.
Connection to the mains supply
The appliance should only be connected to
an earthed socket installed in accordance
with the regulations.
Make sure that the supply voltage
corresponds with the voltage marked on the
rating label. This product complies with all
binding CE labelling directives.
Familiarisation
1. Lid for water container
2. Water container
3. Water level indicator
4. Swing-out filter with removable filter
insert
5. Aroma protection lid
6. Glass carafe
7. Power cord with plug
8. Indicator lamp AUTO
9. Indicator lamp I
10. LCD display
11. Hour set button (H)
12. Minute set button (M)
13. Timer programming button (PROG)
14. On/Off button (I/0)
Important safety instructions
●
Before the appliance is used, the main
body including the power cord as well as
any attachment fitted should be checked
thoroughly for any defects. Should the
appliance, for instance, have been
dropped onto a hard surface, it must not
be used any longer: even invisible
damage may have adverse effects on the
operational safety of the appliance.
●
Before use, make sure that the handle of
the glass carafe is properly and securely
fitted. If necessary, the metal ring may be
tightened by means of the screw in the

Coffee Maker

handle.
●
During operation, the coffee maker must
be placed on a level, non-slip surface,
impervious to splashes and stains.
●
Do not allow the appliance or its power
cord to touch hot surfaces or to come
into contact with any heat sources.
●
Caution: the hot-plate becomes very hot
during operation.
●
To prevent the danger of hot water or
steam being emitted, always switch off
the coffee maker and allow sufficient
time for the appliance to cool down
before it is opened or any accessories or
attachments are removed.
●
Once the water container has been filled
with water, ensure that the filter and the
glass carafe have been correctly fitted to
the appliance. If the appliance is witched
on accidentally, this will prevent the hot
water from being emitted in an
uncontrolled way.
●
It is possible for the function of the
appliance to be interrupted by a nearby
source of electrostatic discharge.
However, once this is removed, it will
operate normally again.
●
Always switch off the appliance after use.
●
Remove the plug from the wall socket
- in case of any malfunction,
- during cleaning,
- if the appliance is not being used for an
extended period of time.
Each time the appliance is reconnected
to the mains power, the internal clock
must be re-set.
●
When removing the plug from the wall
socket, never pull on the power cord;
always grip the plug itself.
●
Do not allow the power cord to hang
free; the cord must be kept well away
from hot parts of the appliance.
●
This appliance is not intended for use by
any person (including children) with
reduced physical, sensory or mental
capabilities, or lacking experience and
knowledge, unless they have been given
supervision or instruction concerning the
8