Intended Use; Items Supplied - EINHELL TE-MS 18/210 Li Traduction Du Mode D'emploi D'origine

Masquer les pouces Voir aussi pour TE-MS 18/210 Li:
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

17. Turntable
18. Fixed saw table
19. Scale (saw head)
20. Pointer (saw head)
21. Locking grip
22. Sawdust bag
23. LED lamp
24. On/Off switch for LED lamp
25. Retaining pin
26. Locking screw for clamping device
27. Screw with knurled nut for cutting depth
limiter
28. Stop for cutting depth limiter
29. Adjustment screw - 0° setting
30. Adjustment screw - 45° setting
31. Flange bolt
32. Outer fl ange
33. Holder for clamping device (horizontal)
34. Foot
35. Laser
36. On/Off switch for laser
37. Adjustable stop rail
38. Locking screw for adjustable stop rail
39. Saw blade wrench
40. Angle stop (not included)
41. Hex key (not included)
42. Screw
43. Extractor connection
44. Battery capacity indicator
45. Battery capacity indicator button

2.2 Items supplied

Please check that the article is complete as
specifi ed in the scope of delivery. If parts are
missing, please contact our service center or the
store where you made your purchase at the latest
within 5 work days after purchasing the article and
upon presentation of a valid bill of purchase.
Open the packaging and take out the
equipment with care.
Remove the packaging material and any
packaging and/or transportation braces (if
present).
Check to see if all the items are supplied.
Inspect the equipment and accessories for
transport damage.
If possible, keep the packaging until the end
of the guarantee period.
Danger!
The equipment and packaging material are
not toys. Do not let children play with plastic
bags, plastic sheets and small parts. There is
a risk of choking and suff ocating!
Anl_TE_MS_18_210_Li_SPK7_USA.indb 16
Anl_TE_MS_18_210_Li_SPK7_USA.indb 16
EN
Cordless crosscut saw
Adjustable workpiece support (left and right)
Clamping device
Sawdust bag
Saw Blade wrench
Transport handle
Original operating instructions
Safety information
Separately available accessories
18V 1.5Ah P-X-C lithium-ion battery
18V 2.0Ah P-X-C lithium-ion battery
18V 2.6Ah P-X-C Plus lithium-ion battery
18V 3.0Ah P-X-C lithium-ion battery
18V 4.0Ah P-X-C lithium-ion battery
18V 5.2Ah P-X-C Plus lithium-ion battery
18V P-X-C charger
Explore battery + charger options at
einhellUSA.com

3. Intended use

The cordless crosscut saw is designed for cross-
cutting wood and wood-type materials which are
appropriate for the machine's size. The saw is not
designed for cutting fi rewood.
The equipment is allowed to be used only for its
prescribed purpose. Any other use is deemed to
be a case of misuse. The user/operator and not
the manufacturer will be liable for any damage or
injuries of any kind resulting from such misuse.
Please note that our equipment has not been
designed for use in commercial, trade or
industrial applications. Our warranty will be voided
if the equipment is used in commercial, trade or
industrial businesses or for equivalent purposes.
The equipment is to be operated only with
suitable saw blades. It is prohibited to use any
type of cutting-off wheel.
To use the equipment properly you must also
observe the safety information, the assembly
instructions and the operating instructions to be
found in this manual. All persons who use and
service the equipment have to be acquainted
with these operating instructions and must be
informed about the equipment's potential hazards.
It is also imperative to observe the accident
prevention regulations in force in your area. The
- 16 -
05.08.2019 14:05:51
05.08.2019 14:05:51

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

4300892

Table des Matières