Layout And Items Supplied - EINHELL TE-MS 18/210 Li Traduction Du Mode D'emploi D'origine

use one with a minimum cross-section
of 1.5 mm² to ensure that the machine is
supplied with power.
•
If you use a cable reel, the complete
cable must be pulled off the reel.
•
Keep children and other people away
from the equipment. When not in use, stow
the equipment in a location that is out of
reach of children and unauthorized users.
•
Pull out the power plug (or take out the
rechargeable battery) and check that
the blade does not touch the table or
workpiece stop in any cutting position.
•
Adopt a safe working position for your
work to ensure that neither of your hands
could come into contact with the saw
blade if they suddenly slip.
•
Always stand to the side of the saw blade
when working.
Caution! Take extra care when making double
miter cuts.
•
To rectify faults or remove jammed pieces
of wood, always switch off the machine
first. Always pull out the power plug (or take
out the rechargeable battery).
•
Be sure to observe the safety information
and operating and maintenance
instructions issued by the manufacturer,
as well as the maximum workpiece
dimensions listed in the technical data.
•
Be sure to observe the accident
prevention regulations in force in your
area as well as all other generally
recognized rules of safety. If you are
inexperienced in the use of the machine,
you can seek the advice of a qualified
professional or attend courses to become
trained in using the machine.
Keep the safety information and original
operating instructions in a safe place and
pass them on with the machine if you hand
the machine on to another person.
Anl_TE_MS_18_210_Li_SPK7_USA.indb 15 Anl_TE_MS_18_210_Li_SPK7_USA.indb 15
EN
Special information about the laser
Caution: Laser radiation
Do not look into the beam
Laser class 2
LASER RADIATION
DO NOT STARE INTO BEAM
CLASS 2 LASER PRODUCT
•
Never look directly into the laser path.
•
Never direct the laser beam at reflecting
surfaces or persons or animals. Even a low
output laser beam can inflict injury on the eye.
•
Caution: It is vital to follow the work
procedures described in these instructions.
Using the equipment in any other way
may result in hazardous exposure to laser
radiation.
•
Never open the laser module.
•
It is prohibited to carry out any modifications
to the laser to increase its power.
•
The manufacturer cannot accept any liability
for damage due to non-observance of the
safety information.
•
Switch off the laser when not in use.

2. Layout and items supplied

2.1 Layout (Fig. 1-14)
1. Handle
2. On/Off switch
3. Release button
4. Machine head
5. Spindle lock
6. Adjustable blade guard
7. Saw blade
8. Clamping device
9. Transport handle
10. Adjustable workpiece support
11. Fixed stop rail
12. Table insert
13. Folding longitudinal stop
14. Locking screw
15. Pointer (saw table)
16. Scale (saw table)
- 15 -
05.08.2019 14:05:51 05.08.2019 14:05:51