Removing The Unit - Kenwood KDC-BT950DAB Mode D'emploi

Installation/Connection
Installing the unit (in-dash mounting)
Example: /
1
2
Hook on the top side
Orientate the trim
plate as illustrated
before fitting.
32
ENGLISH
Do the required wiring.
(Page 33)
Dashboard of
your car
Bend the appropriate tabs to hold the
sleeve firmly in place.

Removing the unit

For /
1 Detach the faceplate.
2 Fit the catch pin on the extraction keys into the holes on both sides of
the trim plate, then pull it out.
3
Insert the extraction keys deeply into the slots on each side, then
follow the arrows as shown on the illustration.
For /
1
Detach the faceplate.
2
Remove the trim plate.
3
Insert the extraction keys deeply into the slots on each side, then
follow the arrows as shown on the illustration.
:
: